Continuing Education for Mechanical
The State of Kansas requires 12 classroom hours of continuing education every 2 years or 6 classroom hours every year to renew your Master or Journeyman license or certificate. ATTENTION: Starting January 1, 2010 not less than 6 hours every 2 years or 3 hours every year shall consist of training on code related to HVAC. The City of Wichita went to a 2-year renewal cycle on certificates and all certificates expire December 31st of each odd-number year. When you renew your certificate, you will have to provide information on the class(es) you attended to show 12 hours of education, 6 hours of which will have to be on code related to HVAC. Continuing Education CEU Log Certificate Renewal Form The City of Wichita will accept Mechanical and Plumbing classes approved by the Kansas Mechanical Trades Review Board. For a list of approved classes, click on the link below and then the link to "Continuing Education Calendar". Kansas Mechanical Trades Review Board If you would like to submit a class for review and approval for continuing education to the City of Wichita instead of the Kansas Mechanical Trades Review Board. Application for approval of HVAC Continuing Education class Here is the list of classes that have been approved for continuing education hours by the City of Wichita. These classes are in addition to the classes listed on the Kansas Mechanical Trades Review Board (see link above). The City of Wichita is not affiliated with the sponsors nor do we have any information on the classes other than what is posted here. Be sure to check back often as more classes are continually added. Approved classes for 2005 Approved classes for 2006 Approved classes for 2007 Approved classes for 2008 Approved classes for 2009 Approved classes for 2010 Approved classes for 2011 The following are 2012 and future classes that are approved for continuing education for the City of Wichita but have not been approved by the Kansas Mechanical Trades Review Board . Dates in green are upcoming classes. Date Sponsor Class Name Instructor Code Approved Credit Hours Credit Hours Approved But NOT as Code Feb. 3, 2012 Kansas Construction Safety Service Lead Safe Work Practices for Kansas Walter Marroquin 8 Feb. 7, 2012 W. B. Carter Construction Excavation Safety Program Kansas One-Call - 1.5 Feb. 11, 2012 Plumbers & Pipefitters Apprenticeship Training of Kansas Pipefitting Layout Calvin Startzman 8 - Feb. 17, 2012 Kansas Construction Safety Service Lead Safe Work Practices for Kansas Walter Marroquin 8 Feb. 20, 21, 22 & 23, 2012 Wichita Area Builders Association OSHA 510 – Standards for the Construction Industry Approved OSHA Instructor - 32 Feb. 24, 2012 Precision Environmental Training Center Asbestos in the Workplace Leon Conway - 3 Feb. 25, 2012 Plumbers & Pipefitters Apprenticeship Training of Kansas Pipefitting Layout Calvin Startzman 8 - Mar. 2, 2012 Kansas Construction Safety Service Lead Safe Work Practices for Kansas Walter Marroquin 8 Mar. 5, 2012 Wichita Area Builders Association OSHA 500 – Trainer Course for the Construction Industry Approved OSHA Instructor - 32 Mar. 23, 2012 Precision Environmental Training Center Asbestos in the Workplace Leon Conway - 3 Mar. 27, 2012 Wichita Area Builders Association OSHA 7405 – Fall Hazards for the Construction Industry Approved OSHA Instructor - 8 Mar. 29, 2012 Wichita Area Builders Association OSHA 7410 – Managing Excavation Hazards Approved OSHA Instructor - 8 Apr. 17, 2012 Wichita Area Builders Association OSHA 7115 – Lockout / Tagout Approved OSHA Instructor - 6 Apr. 24, 2012 Wichita Area Builders Association OSHA 7845 – Record keeping Rule Seminar Approved OSHA Instructor - 4 May 4, 2012 Precision Environmental Training Center Asbestos in the Workplace Leon Conway - 3 May. 15, 2012 Wichita Area Builders Association OSHA 7100 – Intro to Machinery / Safe Guarding Approved OSHA Instructor - 4 May. 22, 2012 Wichita Area Builders Association OSHA 7500 – Intro to Safety & Health Management Approved OSHA Instructor - 8 Aug. 10, 2012 Precision Environmental Training Center Asbestos in the Workplace Leon Conway - 3 Aug. 28, 2012 Wichita Area Builders Association OSHA 7510 – Intro to OSHA for Small Business Approved OSHA Instructor - 8 Sept. 20, 2012 Precision Environmental Training Center Asbestos in the Workplace Leon Conway - 3 Sept. 24, 25, 26 & 27, 2012 Wichita Area Builders Association OSHA 510 – Standards for the Construction Industry Approved OSHA Instructor - 32 Oct. 11, 2012 Wichita Area Builders Association OSHA 7115 – Lockout / Tagout Approved OSHA Instructor - 6 Oct. 15, 16, 17 & 18, 2012 Wichita Area Builders Association OSHA 500 – Trainer Course for the Construction Industry Approved OSHA Instructor - 32 Oct. 30, 2012 Wichita Area Builders Association OSHA 7405 – Fall Hazards for the Construction Industry Approved OSHA Instructor - 8 Nov. 6, 2012 Wichita Area Builders Association OSHA 7845 – Record keeping Rule Seminar Approved OSHA Instructor - 4 Nov. 6, 2012 Precision Environmental Training Center Asbestos in the Workplace Leon Conway - 3 Nov. 27, 2012 Wichita Area Builders Association OSHA 7410 – Managing Excavation Hazards Approved OSHA Instructor - 8 Dec. 4, 2012 Wichita Area Builders Association OSHA 7100 – Intro to Machinery / Safe Guarding Approved OSHA Instructor - 4 Dec. 13, 2012 Precision Environmental Training Center Asbestos in the Workplace Leon Conway - 3 Dec. 18, 2012 Wichita Area Builders Association OSHA 7500 – Intro to Safety & Health Management Approved OSHA Instructor - 8 TBA Kansas Safety Training Center, Inc Excavation & Trenching Safety Rex Smith - 8 Jan. 3, 2012 Dondlinger & Sons Construction CPR/FA/AED/BBP Diane Burris 8 Jan. 4, 2012 Dondlinger & Sons Construction CPR/FA/AED/BBP Diane Burris 8 Jan. 5, 2012 Dondlinger & Sons Construction CPR/FA/AED/BBP Diane Burris 8 Jan. 6, 2012 Dondlinger & Sons Construction CPR/FA/AED/BBP Diane Burris 8 Jan. 19, 2012 Air Capital Chapter R.S.E.S. Reach-In Commercial Refrigeration Dave Roosevelt - 2 Jan. 20, 2012 Precision Environmental Training Center Asbestos in the Workplace Leon Conway - 3 Jan. 21, 2012 Plumbers & Pipefitters Apprenticeship Training of Kansas Pipefitting Layout Calvin Startzman 8 - Jan. 24, 2012 Wichita Area Builders Association OSHA 7510 – Intro to OSHA for Small Business Approved OSHA Instructor - 8 Jan. 25, 2012 W. B. Carter Construction Confined Space Entry Dan Steigerwald - 1
The State of Kansas requires 12 classroom hours of continuing education every 2 years or 6 classroom hours every year to renew your Master or Journeyman license or certificate.
ATTENTION: Starting January 1, 2010 not less than 6 hours every 2 years or 3 hours every year shall consist of training on code related to HVAC.
The City of Wichita went to a 2-year renewal cycle on certificates and all certificates expire December 31st of each odd-number year. When you renew your certificate, you will have to provide information on the class(es) you attended to show 12 hours of education, 6 hours of which will have to be on code related to HVAC.
The City of Wichita will accept Mechanical and Plumbing classes approved by the Kansas Mechanical Trades Review Board. For a list of approved classes, click on the link below and then the link to "Continuing Education Calendar".
If you would like to submit a class for review and approval for continuing education to the City of Wichita instead of the Kansas Mechanical Trades Review Board.
Here is the list of classes that have been approved for continuing education hours by the City of Wichita. These classes are in addition to the classes listed on the Kansas Mechanical Trades Review Board (see link above). The City of Wichita is not affiliated with the sponsors nor do we have any information on the classes other than what is posted here. Be sure to check back often as more classes are continually added.
Approved classes for 2005
Approved classes for 2006
Approved classes for 2007
Approved classes for 2008
Approved classes for 2009
Approved classes for 2010
Approved classes for 2011
The following are 2012 and future classes that are approved for continuing education for the City of Wichita but have not been approved by the Kansas Mechanical Trades Review Board .
Dates in green are upcoming classes.
Date
Sponsor
Class Name
Instructor
Code Approved
Credit
Hours
Credit Hours
Approved
But NOT as Code
Feb. 3, 2012
Kansas Construction Safety Service
Lead Safe Work Practices for Kansas
Walter Marroquin
8
Feb. 7, 2012
W. B. Carter Construction
Excavation Safety Program
Kansas One-Call
-
1.5
Feb. 11, 2012
Plumbers & Pipefitters Apprenticeship Training of Kansas
Pipefitting Layout
Calvin Startzman
Feb. 17, 2012
Feb. 20, 21, 22 & 23, 2012
Wichita Area Builders Association
OSHA 510 – Standards for the Construction Industry
Approved OSHA Instructor
32
Feb. 24, 2012
Precision Environmental Training Center
Asbestos in the Workplace
Leon Conway
3
Feb. 25, 2012
Mar. 2, 2012
Mar. 5, 2012
OSHA 500 – Trainer Course for the Construction Industry
Mar. 23, 2012
Mar. 27, 2012
OSHA 7405 – Fall Hazards for the Construction Industry
Mar. 29, 2012
OSHA 7410 – Managing Excavation Hazards
Apr. 17, 2012
OSHA 7115 – Lockout / Tagout
6
Apr. 24, 2012
OSHA 7845 – Record keeping Rule Seminar
4
May 4, 2012
May. 15, 2012
OSHA 7100 – Intro to Machinery / Safe Guarding
May. 22, 2012
OSHA 7500 – Intro to Safety & Health Management
Aug. 10, 2012
Aug. 28, 2012
OSHA 7510 – Intro to OSHA for Small Business
Sept. 20, 2012
Sept. 24, 25, 26 & 27, 2012
Oct. 11, 2012
Oct. 15, 16, 17 & 18, 2012
Oct. 30, 2012
Nov. 6, 2012
Nov. 27, 2012
Dec. 4, 2012
Dec. 13, 2012
Dec. 18, 2012
TBA
Kansas Safety Training Center, Inc
Excavation & Trenching Safety
Rex Smith
Jan. 3, 2012
Dondlinger & Sons Construction
CPR/FA/AED/BBP
Diane Burris
Jan. 4, 2012
Jan. 5, 2012
Jan. 6, 2012
Jan. 19, 2012
Air Capital Chapter R.S.E.S.
Reach-In Commercial Refrigeration
Dave Roosevelt
2
Jan. 20, 2012
Jan. 21, 2012
Jan. 24, 2012
Jan. 25, 2012
Confined Space Entry
Dan Steigerwald
1
Office of Central Inspection City Hall, 7th floor 455 N. Main Wichita, Kansas 67202
Hours: 8:00 AM-5:00 PM Monday-Friday
: (316) 268-4460 : (316) 268-4663 : Central Inspection