The City of Wichita went to a 2-year renewal cycle on certificates and all certificates expire December 31st of each odd-number year. When you renew your certificate, you will have to provide information on the class(es) you attended to show 12 hours of education. Download the standardized form, Continuing Education CEU Log, to submit with your renewal application.

The Electrical Education Review Committee was appointed, with cooperation from several of the jurisdictions, to review classes that will be approved to provide the required continuing education. We are making every effort possible to have the classes listed here approved by all of the surrounding jurisdictions.

Click on any organization name below for more information.  The City of Wichita is not affiliated with the sponsors nor do we have any information on the classes other than what is posted here.

Dates in Green are for upcoming scheduled classes.

2009

Presenting Organization	Class Name	Instructor	Date(s)	Credit Hours
Square D	Drive & Soft Seminar	Jon Smith	June 3, 2009	3.5
Wichita Electrical Joint Apprenticeship & Training Center	NFPA 70E – 2009 Edition	Darryl Hill	June 4 & 11, 2009	6
W.A.T.C.	OSHA 10 hour General Industry	Rex Smith	Feb. 5 & 6, 2008 Feb. 16 & 17, 2009 Mar. 5 & 6, 2009 May 5 & 6, 2009 June 1 & 2, 2009 June 7 & 8, 2009	10
W.A.T.C.	Powered Industrial Trucks/Aerial Lift	Rex Smith	June 11, 2009	7
W.A.T.C.	Powered Industrial Trucks	Rex Smith	June 11, 2009	5
W.A.T.C.	Aerial Lift	Rex Smith	June 11, 2009	4
C & M Enterprises	Dwelling Service & Feeder Calculations 2008 NEC	Mike Weaver	Apr. 4, 2009 – Salina Apr. 24, 2009 – Pittsburg Jun. 13, 2009 – Emporia Aug. 1, 2009 - Hutchinson Sept. 12, 2009 - Manhattan Nov. 14, 2009 - Wichita	6
W.A.T.C.	HUD Lead Safe Work Practices	Rex Smith	Feb. 12, 2009 Mar. 19, 2009 June 17, 2009	8
Independent Electrical Contractors	Application of Basic Guard Locking	Rockwell Automation & Stanion Wholesale	June 17, 2009 June 18, 2009	4
Independent Electrical Contractors	Safety Standards Advanced	Rockwell Automation & Stanion Wholesale	June 17, 2009 June 18, 2009	4
Independent Electrical Contractors	Safety Standards Basics	Rockwell Automation & Stanion Wholesale	June 17, 2009 June 18, 2009	4
Independent Electrical Contractors	Introduction to MP-series Linear Stage & Integrated Motion Safety	Rockwell Automation & Stanion Wholesale	June 17, 2009 June 18, 2009	4
Independent Electrical Contractors	Introduction to Kinetix Integrated Motion & Motion Analyzer Software	Rockwell Automation & Stanion Wholesale	June 17, 2009 June 18, 2009	4
Independent Electrical Contractors	Integrated Architecture for Beginners	Rockwell Automation & Stanion Wholesale	June 17, 2009 June 18, 2009	4
Independent Electrical Contractors	Integrated Architecture for Advanced Users	Rockwell Automation & Stanion Wholesale	June 17, 2009 June 18, 2009	4
Independent Electrical Contractors	PF7 Series VFD Communications	Rockwell Automation & Stanion Wholesale	June 17, 2009 June 18, 2009	4
Independent Electrical Contractors	PF4 Series VFD Communications	Rockwell Automation & Stanion Wholesale	June 17, 2009 June 18, 2009	4
Independent Electrical Contractors	Application of Safety Opto Electronics	Rockwell Automation & Stanion Wholesale	June 17, 2009 June 18, 2009	4
Wichita Electrical Joint Apprenticeship & Training Center	OSHA 10	David Kalitta	Jan. 17, 2009 Apr. 18, 2009 May 30, 2009 June 20, 2009 July 18, 2009	10
C & M Enterprises	Electrical Calculations under the 2008 NEC	Mike Weaver	Mar. 28, 2009 – Manhattan May 2, 2009 – Topeka Jun. 20, 2009 - Hays Aug. 22, 2009 - Garden City Sept. 19, 2009 - Colby	6
Wichita Electrical Joint Apprenticeship & Training Center	Conduit Bending & Fabrication Level I & II	Darryl Hill	June 18 & 25, 2009 July 9 & 16, 2009	6
Kansas Trane	Advanced Electricity	Nelson Warthan	Jun. 25, 2009	7
Kansas Trane	Advanced Schematics & Wiring Diagrams	Nelson Warthan	Jun. 26, 2009	7
National Electrical Contractors Association	LEED Accredited Professional Examination Preparation for New Construction	Chris Boggiano	July 10, 2009	8
Precision Environmental Training Center	Asbestos in the Workplace	Leon Conway	Jan. 23, 2009 Feb. 27, 2009 Mar. 26, 2009 May 8, 2009 Aug. 14, 2009 Sep. 24,2009 Nov. 10, 2009 Dec. 16, 2009	4
Independent Electrical Contractors	Electrical Trade Hot Topics	Tom Kerschen & John Staton	IEC monthly meeting	½ hr per session
National Electrical Contractors Association	Introduction to the NFPA 70E Arc Flash Standards	Mike Hollar	3rd Monday of each month	1.5
National Electrical Contractors Association	Safety Standards-Advanced Machine Safety Trends	Mike Hollar	2nd Monday of each month	1
National Electrical Contractors Association	Safety Standard Basics	Mike Hollar	2nd Monday of each month	1
Littelfuse Powr-Gard Products	PGS404 – OSHA & NFPA 70E Electrical Safety Training	Kenneth Cybart, Dave Scheuerman or Tom Elsasser	To be announced	8
Shermco Industries Inc	Fundamentals of Frequency AC Drives	Mike O’Quinn	To be announced	16
Shermco Industries Inc	Programmable Logic Controllers	Mike O’Quinn	To be announced	32
Crown Technical Training	Box & Conduit Fill Calculations	Verlon Myers	To Be announced	4
Crown Technical Training	Fundamentals of Electrical Blueprint Reading	Verlon Myers	To Be announced	6
Crown Technical Training	Conductors for General Wiring	Verlon Myers	To Be announced	4
Crown Technical Training	Voltage Drop	Verlon Myers	To be announced	2
Crown Technical Training	Conductor Ampacity	Verlon Myers	To be announced	2
Crown Technical Training	Branch Circuits	Verlon Myers	To be announced	4
Crown Technical Training	Relays, Timers and other Control Devices	Verlon Myers	To Be announced	4
Industrial Electrical Trainers & Consulting	Electrical Calculations	Robert Blume	To Be announced	3
Industrial Electrical Trainers & Consulting	Electrical Safety in the Workplace	Robert Blume	To Be announced	3
Industrial Electrical Trainers & Consulting	Frequency Drives	Robert Blume	To Be announced	6
Industrial Electrical Trainers & Consulting	Grounding & Bonding	Robert Blume	To Be announced	3
Industrial Electrical Trainers & Consulting	Intro to Instrumentation	Robert Blume	To Be announced	3
Industrial Electrical Trainers & Consulting	Basic Motor Controls	Robert Blume	To Be announced	12
Industrial Electrical Trainers & Consulting	Motors & Equipment	Robert Blume	To Be announced	3
Industrial Electrical Trainers & Consulting	PLC Controllers	Robert Blume	To Be announced	12
Industrial Electrical Trainers & Consulting	Power Quality & Meter Safety	Robert Blume	To Be announced	3
Independent Electrical Contractors	Power Quality / Testers & Meters	Ideal Mfg.	To Be Announced	2
Independent Electrical Contractors	Lock Out / Tag Out	Ideal Mfg.	To Be Announced	1
Independent Electrical Contractors	Industrial Wiring	Larry Smith	To Be Announced	8
Independent Electrical Contractors	Ladder Safety	Louisville Ladder	To Be Announced	1
Independent Electrical Contractors	Fire Alarm Basics	Edwards Signal	To Be Announced	2
Independent Electrical Contractors	Facility electrical Protection Solutions	Erico / Cadweld	To Be Announced	2
Independent Electrical Contractors	Troubleshoot Ballasts	Advance Ballast	To Be Announced	1
Independent Electrical Contractors	Examination Prep Course – Journeyman	Rick Rudd	To Be Announced	52
Independent Electrical Contractors	Examination Prep Course – Master	Rick Rudd	To Be Announced	40
Shermco Industries Inc	Basic Protective Relay Calibration	James White	To be announced	36
Shermco Industries Inc	Intermediate Protective Relay Testing	James White	To be announced	36
Shermco Industries Inc	2005 NEC Code Changes	James White	To be announced	8
Shermco Industries Inc	2005/2008 NEC	James White	To be announced	24
IMA of Kansas, Inc	OSHA 10	Dan Steigerwald & Renee Rhodes	To be announced	10
IMA of Kansas, Inc	Medic First Aid/CPR		To be announced	5
National Electrical Contractors Association	Grounding & Bonding Inspection on Jobsites	Carla Monroe	To Be announced	1
National Electrical Contractors Association	Disconnecting Neutrals, Grounds & Bonds	Carla Monroe	To be announced	1
National Electrical Contractors Association	NEC Article 590 Review	Carla Monroe	To be announced	1
National Electrical Contractors Association	Proper Grounding Methods	Carla Monroe	To be announced	1
C & M Enterprises	Soares Grounding & Bonding 2008 NEC	Mike Weaver	To be announced	12
C & M Enterprises	Analysis of the 2008 NEC Code Changes	Mike Weaver	To Be announced	8
C & M Enterprises	Commercial Service & Feeder Calculations	Mike Weaver	To be announced	6
C & M Enterprises	Advanced Grounding & Bonding – Beyond the Basics	Mike Weaver	To be announced	12
Wichita Electrical Joint Apprenticeship & Training Center	Proper Application of NEC Article 430 Motors	Mike Foulk	Jan. 13, 2009	3
Wichita Electrical Joint Apprenticeship & Training Center	Significant Changes to the 2008 NEC	Darryl Hill	Jan. 15, 22, 19 & Feb. 5, 2009 Apr. 30, May 7, 14 & 21, 2009	12
W.A.T.C.	HUD Lead Safety for Remodeling, Repair & Painting	Rex Smith	Jan. 16, 2009	8
Wichita Electrical Joint Apprenticeship & Training Center	First Aid/CPR/AED	Tony Naylor	Jan. 17, 2009 Feb. 21, 2009 Apr. 11, 2009 May 2, 2009	8
Wichita Electrical Joint Apprenticeship & Training Center	OSHA 30	David Kalitta	Jan. 17, 31, Feb. 3, 5 & 10, 2009	10
Wichita Electrical Joint Apprenticeship & Training Center	Variable Frequency Drives	Mike Foulk	Jan. 20, 27 & Feb. 3, 2009	9
Square D	Overcurrent Protection	Dave Gatlin	Jan. 27, 2009 - Goodland	6
C & M Enterprises	Soares Grounding & Bonding 2008 NEC	Mike Weaver	Jan. 24, 2009 – Overland Park Dec. 11, 2009 - Lawrence	8
AGC Construction Training Center	Ladders, Scissor Lifts & Aerial Lifts	Dan Steigerwald	Feb. 10, 2009	2
Wichita Electrical Joint Apprenticeship & Training Center	Elec. Exam Prep Course	Darryl Hill	Feb. 12, 19, 26 Mar. 5 & 12, 2009	15
Independent Electrical Contractors	OSHA 10		Feb. 21, 2009	10
Salina Area Technical College	Electric Motors	Mike Estes	Feb. 26, 2009	2
Power Protection Products Inc	General Power Quality	Mark Cowart	Feb. 16, 2009	3
Wichita Electrical Joint Apprenticeship & Training Center	Basic Motor Controls	Mike Foulk	Feb. 17, 24, Mar. 3 & 10, 2009	12
W.A.T.C.	Powered Industrial Trucks	Rex Smith	Feb. 2, 2009 Mar. 3, 2009 May 4, 2009	4
ICMS Inc.	MSHA (Miner Safety)	Steve Hoskinson	Mar. 5, 2009 Apr. 6, 2009 May 4, 2009	8
Wichita Electrical Joint Apprenticeship & Training Center	CPR/AED	Tony Naylor	Mar. 7, 2009	4
AGC Construction Training Center	Fall Protection	Dan Steigerwald	March 10, 2009	4
Independent Electrical Contractors	CCP299, RSLogix 5000 Level 1: ControlLogix Fundamentals & Troubleshooting	Mike Kaiser	Mar. 16 thru 20, 2009	36
Crown Technical Training	Motors & Motor Calculations	Verlon Myers	Mar. 24, 2009	4
Willis HRH	OSHA 10 for Construction Safety	David Barry	Mar. 24 & 25, 2009	10
Wichita Electrical Joint Apprenticeship & Training Center	NEC 250 Grounding & Bonding	Darryl Hill	Mar. 28, 2009	6
Southwire Company	Southwire Grounding Seminar	Richard Temblador	Mar. 30, 2009	2
Kansas Sunflower Chapter IAEI	One & Two-Family Dwelling Updates & Arc Flash	Jeff Fectean & Darryl Hill	Apr. 2 & 3, 2009	12
Fluke Corporation	Thermography: The Basics or Theory & Application	John W Pratten	Apr. 7, 2009 - Wichita Apr. 8, 2009 - Garden City Apr. 9, 2009 - Salina	4
Wichita Electrical Joint Apprenticeship & Training Center	PLC Controllers	Mike Foulk	Apr. 7, 14, 21, 28 & May 5, 2009	15
Crown Technical Training	Motors & Motor Controls	Verlon Myers	Apr. 8, 2009 – Hutchinson	6
C & M Enterprises	Analysis of the 2008 NEC Code Changes	Mike Weaver	Apr. 18, 2009 - Wichita	6
Crown Technical Training	Electrical Exam Prep	Verlon Myers	Apr. 18 & 19, 2009	16
Iteris, Inc.	Iteris Video Detection	Shawn Cummings	Apr. 21, 2009 Apr. 22, 2009 Apr. 23, 2009	8
Wichita Electrical Joint Apprenticeship & Training Center	3MM – Medium Voltage Termination	Robert Lenac	Apr. 23, 2009	4
Salina Area Technical College	Trench & Excavation for the Competent Person	Midwest Fire Training	Apr. 29, 2009	8
Salina Area Technical College	Confined Space Entry	Midwest Fire Training	Apr. 30, 2009	8
W.A.T.C.	Powered Industrial Trucks/Aerial Lift	Rex Smith	Feb. 2, 2009 Mar. 3, 2009 May 4, 2009	6
B & B Electric Motor Co.	Application and Maintenance of rotating electric machinery	Robert Giesen	Feb. 19, 2009 May 7, 2009	3.5
National Code Seminars	Intro to the 2008 NEC	Steven Owen	May 5 & 6, 2009 – Birmingham, AL May 7 & 8, 2009 – Meridian, MS May 11 & 12, 2009 – Birmingham, AL May 14 & 15, 2009 – Green Bay, WI May 19 & 20, 2009 – Nashville, TN	12
Kansas Trane	Basic Electricity	Nelson Warthan	May 11, 2009	7
Kansas Trane	Schematics & Wiring Diagrams	Nelson Warthan	May 12, 2009	7
AGC Construction Training Center	Hazard Communication, Bloodborne Pathogens & Personal Protective Equipment	Dan Steigerwald	Jan. 13, 2009 May 12, 2009	2
Salina Area Technical College	Intro to OSHA Standards & Record Keeping	April Hill	May 18, 2009	4
Salina Area Technical College	Electrical Safety, Hazard Communications & Walking – Working Surfaces	April Hill	May 19, 2009	3
Wichita Electrical Joint Apprenticeship & Training Center	Box & Conduit Fill and Conductor Properties – NEC Chapter 9	Mike Foulk	May 19, 2009	3
Salina Area Technical College	Blood Borne Pathogens,  Personal Protective Equipment & Safety & Health Program	April Hill	May 20, 2009	3
WESTAR & City of Wichita	2008 NEC Code Update	Tom Kerschen	May 20, 2009	4
ICMS Inc.	General OSHA 10	Steve Hoskinson	Mar. 16, 2009 Apr. 23, 2009 May 21, 2009	10
Crown Technical Training	Analysis of the 2008 NEC	Verlon Myers	Mar. 25, 2009 May 21, 2009 – Great Bend	6
Wichita Electrical Joint Apprenticeship & Training Center	IMSA – Fire Alarm Interior Level I	Mike Foulk	June 2, 9, 16, 23 & 30, 2009	16
Littelfuse Powr-Gard Products	PGS201 – OSHA & NFPA 70E Requirements for Electric Hazard Assessment	Kenneth Cybart, Dave Scheuerman or Tom Elsasser	June 2, 2009	4

The following jurisdictions have agreed to accept these classes for their required continuing education:

• Andover
• Arkansas City
• Augusta
• Bel Aire
• Butler County
• Concordia
• Derby
• El Dorado
• Emporia
• Garden City
• Haysville
• Hutchinson
• Lawrence
• Mulvane
• Pittsburg
• Pratt
• Salina
• Sedgwick County
• Topeka
• Wellington 
• Wichita
• Winfield

Back to Top